Browse recently sold items - Item details

Roland 800 4-Colour Litho Printing Press

• This unit was purchased in 1984/1985 and was last serviced in 2007. It was in working condition back then.
• It is currently not in working condition due to lack of maintenance and the rollers may have fused together at this point
• This press cannot be started, as that would be deemed extremely dangerous due to the fused/seized rollers
• This press will require repairs, maintenance, and potentially new parts
• A box of instruction manuals is included

• Important:
  • The buyer is responsible for the dismantling of all equipment, including the press itself, compressors, flooring covers and all electrical components. The buyer will have to bring a licensed electrician to dismantle all the electrical components.
  • The room the press is located in is equipped with a large set of doors leading to a pit outside of the building. The buyer is responsible to bring the proper equipment to move each piece to this pit and use a crane or boom truck to pick up through this pit.
  • Please note that there are 2 large trees around the pit (1 in front and 1 on the right side), the buyer will have to maneuver around those trees to pick up the pieces from the pit.

Terms and Conditions of Sale:

Removal

1. All associated removal costs including but not limited to transport, logistics, labour, equipment, insurance costs, etc. will be the responsibility of the Purchaser.
2. The Purchaser must submit a removal plan that details how the removal will be carried out, the personnel and equipment required on-site to effectuate the work and the estimated time for completion.
3. The Removal plan must be approved by GCSurplus and NRCan. If removal plan is deemed unacceptable, it may result in the cancellation of the contract.
4. The Purchaser must prepare and remove the assets on-site in accordance with the approved removal plan.
5. All on-site removal work must be completed within twenty-five (25) concurrent business days
6. The Purchaser is responsible for the clean-up of the removal site after removal of the assets and/or scrap materials and byproducts taking place to the satisfaction of NRCan or its representative(s) and must dispose of any waste materials in accordance with the latest environmental regulations.
7. Minimum clean-up requirement and site information:
   • At its own expense, the Purchaser must sweep the assigned area with no observable debris left behind before leaving the removal site.
   • At its own expense, the Purchaser must remove all hazardous or petroleum-based material resulting directly from any equipment leak.
   • The work site must be returned to its original state upon completion of work or as instructed by the NRCan authority for the duration of the project.
   • NRCan or its designated representative will witness the removal as it is being performed and can stop the removal activities at any time to ensure that it is being performed in a safe manner.

Insurance

1. A minimum of 5 million dollars Commercial General Liability Insurance and $2 million Automobile Insurance is a mandatory requirement.

Payment and Deposit

1. A security deposit in the form of a certified cheque, bank draft or an irrevocable standby letter of credit as accepted and approved at the discretion of the GCSurplus Sales Representative, made out to the Receiver General for Canada of an amount of two thousand five hundred dollars ($2,500.00), is a condition precedent to contract award. Should the Purchaser fail to respect fully his/her obligations under the Contract, the deposit will be forfeited to GCSurplus. Such forfeiture must not limit or curtail any of GCSurplus rights as stipulated by law or in the Contract.
2. Payment, security deposit, approved removal plan and proof of insurance are required within 14 days of contract award.

Safety

1. The Purchaser must adhere to all federal and provincial occupational health and safety regulations at all times throughout the duration of the contract.

Site Access and Support

1. Access to the assets will be restricted to the hours of operation of the site. The current hours of operation are from Monday to Friday 7:00 a.m. to 4:00 p.m. (EST) Eastern Standard Time
2. NRCan reserves the right to extend, by mutual agreement with the Purchaser, the on-site access hours to facilitate timely removal of the assets.
3. Canada Support to Purchaser:
   • To aid the Purchaser in the removal of assets, the following support will be provided by if available at Canada's sole discretion:
     • Consultation with the NRCan representative(s) and Canada's specialists
     • Additional technical information
     • The Purchaser is advised that this Article does not represent a commitment by Canada and that it is the Purchaser's sole responsibility to provide all services required to carry out the work detailed above. The Purchaser must be able to work independently on all aspects of the required services.